Superimposition with Exocad – Tutorial 1

 In Case Studies, Software Integration

Here an example of how to integrate OBISCANNER in the digital workflow with EXOCAD. It is important for the dental technicians to model the restorations with a clear view of the integration of these in the face of the patient. With OBISCANNER this is now possible and it is extremely easy. Please take a look at the pictures, in sequence.

Superimposition with Exocad – Tutorial 1
1. Import the .ply files (in colour) from your CS 3600 Intraoral Scanner.
Superimposition with Exocad – Tutorial 1
2. Set the view of your master model.
Superimposition with Exocad – Tutorial 1
3. In the Wizard, go on to the data editor.
Superimposition with Exocad – Tutorial 1
4. Before to crop the project, move to the Expert mode.
Superimposition with Exocad – Tutorial 1
5. In the Expert mode, open the Tools.
Superimposition with Exocad – Tutorial 1
6. Select the "Add/remove mesh" function.
Superimposition with Exocad – Tutorial 1
7. Import the "face scan".
Superimposition with Exocad – Tutorial 1
8. When the face scan is imported, you can move it in the space for free, or register it.
Superimposition with Exocad – Tutorial 1
9. Your superimpose it to the dentate models easily by selecting the "register mesh" tool.
Superimposition with Exocad – Tutorial 1
10. The models should not move. The face should be superimposed on the models.
Superimposition with Exocad – Tutorial 1
11. The models should not move. The face should be superimposed on the models.
Superimposition with Exocad – Tutorial 1
12. The first rough alignment can be perfectioned manually or with best fit.
Superimposition with Exocad – Tutorial 1
13. The superimposition in now acceptable and we can start to work.
Superimposition with Exocad – Tutorial 1
14. The pre-milled provisional resin shield margins are designed.
Superimposition with Exocad – Tutorial 1
15. The pre-milled provisional shield is modelled by the dental technician.
Superimposition with Exocad – Tutorial 1
16. After a few steps, the project has been completed and the restoration is ready.
Superimposition with Exocad – Tutorial 1
17. After a few steps, the project has been completed and the restoration is ready.
Superimposition with Exocad – Tutorial 1
18. The resolution and tessellation of ObiScanner are perfect for this purpose.
Superimposition with Exocad – Tutorial 1
19. We can now mill our restoration with the fantastic Roland DWX-4.
Original post: here.

Superimposition with Exocad – Tutorial 1

 In Non classifié(e), Software Integration

Here an example of how to integrate OBISCANNER in the digital workflow with EXOCAD. It is important for the dental technicians to model the restorations with a clear view of the integration of these in the face of the patient. With OBISCANNER this is now possible and it is extremely easy. Please take a look at the pictures, in sequence.

Superimposition with Exocad – Tutorial 1
1. Import the .ply files (in colour) from your CS 3600 Intraoral Scanner.
Superimposition with Exocad – Tutorial 1
2. Set the view of your master model.
Superimposition with Exocad – Tutorial 1
3. In the Wizard, go on to the data editor.
Superimposition with Exocad – Tutorial 1
4. Before to crop the project, move to the Expert mode.
Superimposition with Exocad – Tutorial 1
5. In the Expert mode, open the Tools.
Superimposition with Exocad – Tutorial 1
6. Select the "Add/remove mesh" function.
Superimposition with Exocad – Tutorial 1
7. Import the "face scan".
Superimposition with Exocad – Tutorial 1
8. When the face scan is imported, you can move it in the space for free, or register it.
Superimposition with Exocad – Tutorial 1
9. Your superimpose it to the dentate models easily by selecting the "register mesh" tool.
Superimposition with Exocad – Tutorial 1
10. The models should not move. The face should be superimposed on the models.
Superimposition with Exocad – Tutorial 1
11. The models should not move. The face should be superimposed on the models.
Superimposition with Exocad – Tutorial 1
12. The first rough alignment can be perfectioned manually or with best fit.
Superimposition with Exocad – Tutorial 1
13. The superimposition in now acceptable and we can start to work.
Superimposition with Exocad – Tutorial 1
14. The pre-milled provisional resin shield margins are designed.
Superimposition with Exocad – Tutorial 1
15. The pre-milled provisional shield is modelled by the dental technician.
Superimposition with Exocad – Tutorial 1
16. After a few steps, the project has been completed and the restoration is ready.
Superimposition with Exocad – Tutorial 1
17. After a few steps, the project has been completed and the restoration is ready.
Superimposition with Exocad – Tutorial 1
18. The resolution and tessellation of ObiScanner are perfect for this purpose.
Superimposition with Exocad – Tutorial 1
19. We can now mill our restoration with the fantastic Roland DWX-4.
Original post: here.

Superimposition with Exocad – Tutorial 1

 In Software Integration, Unkategorisiert

Here an example of how to integrate OBISCANNER in the digital workflow with EXOCAD. It is important for the dental technicians to model the restorations with a clear view of the integration of these in the face of the patient. With OBISCANNER this is now possible and it is extremely easy. Please take a look at the pictures, in sequence.

Superimposition with Exocad – Tutorial 1
1. Import the .ply files (in colour) from your CS 3600 Intraoral Scanner.
Superimposition with Exocad – Tutorial 1
2. Set the view of your master model.
Superimposition with Exocad – Tutorial 1
3. In the Wizard, go on to the data editor.
Superimposition with Exocad – Tutorial 1
4. Before to crop the project, move to the Expert mode.
Superimposition with Exocad – Tutorial 1
5. In the Expert mode, open the Tools.
Superimposition with Exocad – Tutorial 1
6. Select the "Add/remove mesh" function.
Superimposition with Exocad – Tutorial 1
7. Import the "face scan".
Superimposition with Exocad – Tutorial 1
8. When the face scan is imported, you can move it in the space for free, or register it.
Superimposition with Exocad – Tutorial 1
9. Your superimpose it to the dentate models easily by selecting the "register mesh" tool.
Superimposition with Exocad – Tutorial 1
10. The models should not move. The face should be superimposed on the models.
Superimposition with Exocad – Tutorial 1
11. The models should not move. The face should be superimposed on the models.
Superimposition with Exocad – Tutorial 1
12. The first rough alignment can be perfectioned manually or with best fit.
Superimposition with Exocad – Tutorial 1
13. The superimposition in now acceptable and we can start to work.
Superimposition with Exocad – Tutorial 1
14. The pre-milled provisional resin shield margins are designed.
Superimposition with Exocad – Tutorial 1
15. The pre-milled provisional shield is modelled by the dental technician.
Superimposition with Exocad – Tutorial 1
16. After a few steps, the project has been completed and the restoration is ready.
Superimposition with Exocad – Tutorial 1
17. After a few steps, the project has been completed and the restoration is ready.
Superimposition with Exocad – Tutorial 1
18. The resolution and tessellation of ObiScanner are perfect for this purpose.
Superimposition with Exocad – Tutorial 1
19. We can now mill our restoration with the fantastic Roland DWX-4.
Original post: here.
Sovrapposizione con Exocad – Tutorial 1Casi studio, Integrazioni Software